In the typical style of Emacs, Projectile is extremely configurable. Pretty much every aspect of its behaviour can be tweaked or extended.
In this section we'll go over some of the most common things you might want to fine-tune to make Projectile fit your workflow better.
Project indexing method
Projectile has three modes of operation - one is portable and is
implemented in Emacs Lisp (therefore it's native to Emacs and is
known as the
native indexing method) and the other two (
alien) rely on external commands like
git, etc to
obtain the list of files in a project.
alien indexing method optimizes to the limit the speed of
hybrid indexing method. This means that Projectile will not do
any processing or sorting of the files returned by the external commands
and you're going to get the maximum performance possible. This behaviour
makes a lot of sense for most people, as they'd typically be putting
ignores in their VCS config (e.g.
.gitignore) and won't care about
any additional ignores/unignores/sorting that Projectile might also
By default the
alien method is used on all operating systems except Windows.
Prior to Projectile 2.0
hybrid used to be the default (but to make things
hybrid used to be known as
alien back then).
To force the use of native indexing in all operating systems:
(setq projectile-indexing-method 'native)
To force the use of hybrid indexing in all operating systems:
(setq projectile-indexing-method 'hybrid)
To force the use of alien indexing in all operating systems:
(setq projectile-indexing-method 'alien)
This can speed up Projectile in Windows significantly (especially on
big projects). The disadvantage of this method is that it's not well
supported on Windows systems, as it requires setting up some Unix
utilities there. If there's problem, you can always use
The alien indexing works in a pretty simple manner - it simply shells out to a command that returns the list of files within a project. For version-controlled projects by default Projectile will use the VCS itself to obtain the list of files. As an example, here is the command that Projectile uses for Git projects:
git ls-files -zco --exclude-standard
For every supported VCS there's a matching Projectile defcustom holding the command
to invoke for it (e.g.
If you ever decide to tweak those keep in mind that the command should always be returning the list of files relative to the project root and the resulting file list should be 0-delimited (as opposed to newline delimited).
For non-VCS projects Projectile will invoke whatever is in
projectile-generic-command. By default that's:
find . -type f -print0
It's a great idea to install fd and use it as a replacement for both
git ls-files (
The magic command you'll need with it is something like
fd . -0.
You can choose how Projectile sorts files by customizing
Note that if Alien indexing is set, files are not sorted by Projectile at all.
The default is to not sort files:
(setq projectile-sort-order 'default)
To sort files by recently opened:
(setq projectile-sort-order 'recentf)
To sort files by recently active buffers and then recently opened files:
(setq projectile-sort-order 'recently-active)
To sort files by modification time (mtime):
(setq projectile-sort-order 'modification-time)
To sort files by access time (atime):
(setq projectile-sort-order 'access-time)
Since indexing a big project is not exactly quick (especially in Emacs Lisp), Projectile supports caching of the project's files. The caching is enabled by default whenever native indexing is enabled.
To enable caching unconditionally use this snippet of code:
(setq projectile-enable-caching t)
At this point you can try out a Projectile command such as s-p f (M-x projectile-find-file RET).
Running C-u s-p f will invalidate the cache prior to prompting you for a file to jump to.
Pressing s-p z will add the currently visited file to the cache for current project. Generally files created outside Emacs will be added to the cache automatically the first time you open them.
The project cache is persistent and will be preserved during Emacs restarts.
You can purge an individual file from the cache with
M-x projectile-purge-file-from-cache or an
entire directory with
File exists cache
Projectile does many file existence checks since that is how it identifies a project root. Normally this is fine, however in some situations the file system speed is much slower than usual and can make emacs "freeze" for extended periods of time when opening files and browsing directories.
The most common example would be interfacing with remote systems using TRAMP/ssh. By default all remote file existence checks are cached
To disable remote file exists cache that use this snippet of code:
(setq projectile-file-exists-remote-cache-expire nil)
To change the remote file exists cache expire to 10 minutes use this snippet of code:
(setq projectile-file-exists-remote-cache-expire (* 10 60))
You can also enable the cache for local file systems, that is normally not needed but possible:
(setq projectile-file-exists-local-cache-expire (* 5 60))
Using Projectile everywhere
If you want Projectile to be usable in every directory (even without the presence of project file):
(setq projectile-require-project-root nil)
This might not be a great idea if you start Projectile in your home folder for instance. :-)
projectile-switch-project (s-p p) Projectile invokes
the command specified in
projectile-switch-project-action (by default it is
Invoking the command with a prefix argument (C-u s-p p) will trigger the Projectile Commander, which gives you quick access to most common commands you might want to invoke on a project.
Depending on your personal workflow and habits, you
may prefer to alter the value of
This is the default. With this setting, once you have selected your
project via Projectile's completion system (see below), you will
remain in the completion system to select a file to visit.
is capable of retrieving files in all sub-projects under the project root,
such as Git submodules. Currently, only Git is supported. Support for other VCS
will be added in the future.
projectile-find-file but lists all files in all known projects. Since
the total number of files could be huge, it is beneficial to enable caching for subsequent
If point is on a filepath, Projectile first tries to search for that file in project:
If it finds just a file, it switches to that file instantly. This works even if the filename is incomplete, but there's only a single file in the current project that matches the filename at point. For example, if there's only a single file named "projectile/projectile.el" but the current filename is "projectile/proj" (incomplete), projectile-find-file still switches to "projectile/projectile.el" immediately because this is the only filename that matches.
If it finds a list of files, the list is displayed for selecting. A list of files is displayed when a filename appears more than one in the project or the filename at point is a prefix of more than two files in a project. For example, if `projectile-find-file' is executed on a filepath like "projectile/", it lists the content of that directory. If it is executed on a partial filename like "projectile/a", a list of files with character 'a' in that directory is presented.
If it finds nothing, display a list of all files in project for selecting.
(setq projectile-switch-project-action #'projectile-dired)
With this setting, once you have selected your project, the top-level directory of the project is immediately opened for you in a dired buffer.
(setq projectile-switch-project-action #'projectile-find-dir)
With this setting, once you have selected your project, you will remain in Projectile's completion system to select a sub-directory of your project, and then that sub-directory is opened for you in a dired buffer. If you use this setting, then you will probably also want to set
(setq projectile-find-dir-includes-top-level t)
in order to allow for the occasions where you want to select the top-level directory.
By default Projectile uses
ido as its completion system.
extremely popular and it is built into Emacs.
As already noted above if you're going to use the
ido completion it's
extremely highly recommended that you install the optional
flx-ido package, which provides a much
more powerful alternative to
Another completion option is ivy:
(setq projectile-completion-system 'ivy)
Basic (Emacs's default)
If you don't like
ivy you can use regular completion:
(setq projectile-completion-system 'default)
You might want to combine default completion with
icomplete-mode for optimum results.
Custom Completion Function
You can also set
projectile-completion-system to a function:
(setq projectile-completion-system #'my-custom-completion-fn) (setq projectile-completion-system (lambda (prompt choices) ;; ... ))
An example of a custom completion function is this one, which only show the file name (not including path) and if the file selected is not unique, another completion with names relative to project root appears.
To be able to regenerate a project's tags via
should install and add to the PATH
Exuberant Ctags instead of a plain ctags, which
ships with Emacs distribution.
Projectile can be configured to run the hook
projectile-idle-timer-hook every time Emacs is in a project and has
been idle for
projectile-idle-timer-seconds seconds (default is 30
seconds). To enable this feature, run:
M-x customize-group RET projectile RET
projectile-enable-idle-timer to non-nil. By default,
additional functions to the hook using
(add-hook 'projectile-idle-timer-hook #'my-projectile-idle-timer-function)
Mode line indicator
By default the minor mode indicator of Projectile appears in the form " Projectile[ProjectName:ProjectType]". This is configurable via several custom variables:
projectile-mode-line-prefix(by default " Projectile") controls the static part of the mode-line
t) controls whether to display the project name & type part of the mode-line
projectile-default-mode-line) controls the actual function to be invoked to generate the mode-line. If you'd like to show different info you should supply a custom function to replace the default, for example
(setq projectile-mode-line-function '(lambda () (format " Proj[%s]" (projectile-project-name))))
The project name & type will not appear when editing remote files
(via TRAMP), as recalculating the project name is a fairly slow operation there
and would slow down a bit opening the files. They will also not appear for
non-file buffers, as they get updated via